The Jumbo (XL) unwind can handle reels up to 1.5 metres (60”) in diameter allowing a longer run between reel changes. It’s extremely robust with large side frames and handles reels up to 800Kg (or 1760lb) in weight. The Jumbo Unwind includes a 3m servo balanced web buffer which enables it to interface seamlessly with any manufacturer’s web press. Powerful servo motors are braked and allow pre-tension and the unit contains an infeed drive with plasma coated roller and closed loop tension control.
A hydraulic roll lift safely assists with loading/unloading material and safety chucks securely lock the reels into place. Practical features like a retractable splice table, tape dispenser, air mandrel inflation gun to hand and nearby controls exactly where you need them make it extremely efficient to use.
It can be added to all Edale printing presses such as the FL3, FL5 and FL7 but also be used in a number of other special configurations such as foilers, converters, flat bed die cutters and even on other brands of printing press.
The Jumbo Unwind gives you:
|Web widths available||430mm | 510mm | 570mm | 650mm|
|Mechanical speed flexo |
(Actual print speeds are subject to substrate, application and consumables)
|5-200 m/min | 16.4-200 ft/min|
|Mandrels Available||3” (76.2mm) | 6” (152.4mm) | 12” (304.8mm) |
Mechanical mandrels 12” also available on request
|Substrate thickness||12-700 microns|
|Max Roll Weight||800kg | 1760lb|
Edale offer a customised approach to suit your specific requirements