Performance
& Technology
  • SHORT SET UP TIME Under 10 minutes (based on eight colour print, and die)
  • LOW WASTE Under 20m (based on eight colour print, and die)
  • PRINT QUALITY Matches offset
  • SINGLE PASS Finished product with one machine
  • FAST COLOUR CHANGE Print station colour change in under 70 seconds
  • SET UP ‘ON-THE-FLY’ Set free print stations up for the next job during production run
  • WIDE SUBSTRATE RANGE Unique print drive eliminates gear drive between print cylinder
    and impression roll
  • ON PRESS COLOUR MATCHING Adjust colour without interfering with inking and impression
  • UNIPRINT TECHNOLOGY Unique print head geometry ensures consistently high print
    quality whatever the format size
  • PRE REGISTER Pre-sets register position before running any web through the
    machine.
  • AUTO REGISTER Maintains accurate and stable registration
  • ‘SET & FORGET’ IMPRESSION Results in reduced set up times
  • JOB MANAGEMENT Unlimited Job Storage facility stores infinite jobs, production data
    and press settings.
Technical
Specifications
  • Max. no. of print stations 12
  • Max. no. of die stations 3
  • WEB WIDTH 350mm or 430mm (14” or 17”)
  • MAX PRINT WIDTH (SCREEN) 330mm (12”)
  • Max. mechanical speed 200m/min (660ft/min)
  • MAX. UNDWIND /
    REWIND CAPACITY
    1000mm (40”)
  • MIN. PRINT AND DIE REPEAT 203mm (8”)
  • Max. print and die repeat 610 mm (24”)
  • MIN. PRINT AND DIE
    REPEAT (SCREEN)
    304.8mm (12”)
  • MAX. PRINT AND DIE
    REPEAT (SCREEN)
    457.2mm (18”)
  • Substrate range* 12-450 micron (1/2pt-18pt)
  • *Substrate range is subject to machine configuration. Actual performance will be subject to trial.
Standard
Specifications
  • • 1000mm / (40”) diameter servo braked unwind -
    and rewind - with 3” air mandrel
  • • Web guide with ultra-sonic sensor
  • • Servo driven infeed and outfeed drives with
    closed loop tension control
  • • Print stations equipped with pre-register
  • • Self cleaning plate system
  • • Die cutting and sheeting stations
  • • Operator friendly touch-screen HMI interface
  • • Web break detection
  • • Job storage
  • • CE guarding
Options
  • • Additional die cutting station
  • • Air assisted turn bar
  • • Automatic cross register
  • • Break Frete waste stripping system
  • • Auto register (print to mark)
  • • Cold foil
  • • Corona treatment
  • • De-lam / Re-lam
  • • Dual axis servo
  • • Fan folder
  • • Hot foil
  • • Lamination
  • • Rail system
  • • Rotary screen printing
  • • Second rewind
  • • Shingling delivery table
  • • Slitting
  • • Sprocket hole punching
  • • UV, water based or combination drying
  • • Video inspection
  • • Water cooled chill rollers
  • • Web cleaning
  • • 100% print inspection
Our Network Find out about our ever-expanding
global network. Find out more >
Our Support Get in touch for machine aftercare
and support Find out more >
Contact Us To find out how Edale can
help Contact Us >